Go to content

Main menu:

Rotary Hammers

Online Shop > Power Tools
6.00340.00 KHE 56

6.00340.00 KHE 56

Electronic Combination Hammer KHE 56

• Suitable for bits and accessories with SDS-max shank end
• With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread
• rotation stop
• Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles
• Additional handle can be fitted to three places on the housing
• Optional 30% impact reduction setting for working with more pliant materials
• Vario Tacho Constamatic (VTC) full-wave electronics
• Electronic soft start for precise spot-drilling
• magnesium die cast gear housing
• torque limiting clutch
• Stoppable switch for trouble-free chiselling in continuous operation
• Chisel can be fixed in 12 positions
• auto-stop carbon brushes
• The service display, for example, indicates when the carbon brush needs to be replaced, plus an LED indicating mains voltage


Comparative technical values
Torque 90 Nm
- Drill diameter in
- Concrete with hammer drills 45 mm
- Concrete with core bits 65 mm
- Concrete with core bits 100 mm
Idle revolution 0 - 300 /min
Rated input power 1.300 W
Output power 650 W
Maximum impact rate 2.840 /min
Max. single blow energy (EPTA) 8,5 J
Impact power 402 J/s
Collar diameter 66 mm
Bit retainer SDS-max
Weight (without power cable) 6,7 kg


Scope of delivery
Metabo VibraTech (MVT) side handle, Drilling depth guide, Lubricant for tool shank end, Duster, Plastic carry case

6.00596.00 KHE 96

6.00596.00 KHE 96

Electronic Combination Hammer KHE 96

• Suitable for bits and accessories with SDS-max shank end
• With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread
• Easy to hold in all working situations: three rubber-coated handles always ensure an optimal holding position
• Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles
• Additional handle can be fitted to three places on the housing
• The adjustable front handle can be rotated 360° and the angle adjusted
• Long, slim design for an upright working position when performing tasks at ground level
• rotation stop
• Vario Tacho Constamatic (VTC) full-wave electronics
• Thumbwheel for preselection of speed
• Electronic soft start for precise spot-drilling
• die cast aluminium gear housing
• torque limiting clutch
• Stoppable switch for trouble-free chiselling in continuous operation
• Chisel can be fixed in 16 positions
• auto-stop carbon brushes
• brush wear indicator


Comparative technical values
Torque 120 Nm
- Drill diameter in
- Concrete with hammer drills 50 mm
- Concrete with core bits 80 mm
- Concrete with core bits 150 mm
Idle revolution 125 - 250 /min
Rated input power 1.700 W
Output power 850 W
Maximum impact rate 1.950 /min
Max. single blow energy (EPTA) 20 J
Impact power 658 J/s
Collar diameter 73 mm
Bit retainer SDS-max
Weight (without power cable) 11,8 kg


Scope of delivery
Metabo VibraTech (MVT) side handle, Drilling depth guide, Lubricant for tool shank end, Duster, Plastic carry case

6.00597.00 KHE 2443

6.00597.00 KHE 2443

Electronic Combination Hammer KHE 22443

• Suitable for bits and accessories with SDS-plus shank end
• With the appropriate accessories, it is also suitable for bits and accessories with cylindrical shank end (no impact)
• High performance hammer action, precisely mounted in a housing made of aluminium alloy: long-lasting and robust
• hammer stop
• rotation stop
• clockwise and anti-clockwise rotation
• Electronic soft start for precise spot-drilling
• Rubber-coated handle
• Stoppable switch for trouble-free chiselling in continuous operation
• Variospeed (V) electronics
• Metabo S-automatic torque limiting clutch
• auto-stop carbon brushes


Comparative technical values
Torque 15 Nm
- Drill diameter in
- Concrete with hammer drills 24 mm
- Masonry with core bits 68 mm
- Steel 13 mm
- Soft wood 30 mm
Idle revolution 0 - 1.150 /min
Rated input power 800 W
Output power 410 W
Revolutions at rated load 960 /min
Maximum impact rate 5.400 /min
Max. single blow energy (EPTA) 2,3 J
Impact power 166 J/s
Collar diameter 43 mm
Bit retainer SDS-plus
Weight (without power cable) 2,5 kg


Scope of delivery
Hammer chuck for tools with SDS-plus shank end, Side handle, Drilling depth guide, Plastic carry case

Back to content | Back to main menu UA-34502521-1